Français
GL6A
Generator set compact control panel - Automatic
BENEFITS
- Compact and solid
- Outstanding functions & user-friendliness
- Complete protection & data display
- 40 amps fused output relays
- Optional control by phone line or Internet
- Very competitive price
- CSA approved
FEATURES
- Includes the powerful RGAM40 controller from Lovato
- For AC systems from 120 to 600 Vac, 1 & 3 phases, 50/60/400Hz
- 3 output relay with 40 amps protection fuse on each
- Complete power & instrumentation display
- Automatic or manual start (start & stop button)
- Telecommunication interface included (RS-232)
- CANbus, IP and RS-485 communication
- A.C. voltage input fuse protection (normal side)
- DC input protection circuit by fuse
- Engine speed by: mag. pick-up, charging alt. or generator
- Available version with terminals or with ready to connect wires
- Shock mount for vibration protection included
- VDO oil pressure and coolant temperature sender included
- Complete documents for the installation & setup
- RGAM40 Controller
- (* models 41 or 42 in option)
- Large LCD graphic display with backlight, functional at -30°C
- Quick-connect terminal block
- 8 programmable digital [contact] inputs (6 connected in standard)
- 6 internal output relays (1 form ‘C’ & 3 x NO form connected in standard)
- Allows the use of multiple predefined sender models or manual configuration
- Buttons: START/ STOP/ TEST/ AUTO/ MAN/ RESET-OFF/ MAINS/ GEN
- Choice of 5 languages
- Information on status, alarms and events
- Events and data recording (255 events)
- Automatic call* to a remote PC when a specific fault or event is activated
- More then 125 system parameters saved in flash memory for your default recall
- Programmable system information and Logo download
- Weekly Exerciser *
- Load bank control facility
- Modbus protocol* available for PLC communication
- Fast setup on site by the controller keypad or by using an Windows software*
- Powerful software* available for programming, controlling and monitoring.
- List of alarms:
- Pre-alarm & shutdown on high coolant temperature [analogue]
- High coolant temperature [digital]
- Pre-alarm & shutdown on low oil pressure [analogue]
- Low oil pressure [digital]
- Pre-alarm & shutdown on low fuel level [analogue]
- Low fuel level [digital]
- High, low & very low battery voltage
- Defective battery charge alternator
- Speed signal lost (magnetic pickup)
- Low / high frequency
- Defective starter
- Emergency stop
- Unexpected stop
- Engine stop failure
- Low / high generator frequency
- Low / high generator voltage
- Asymmetry / short-circuit & generator overload
- External generator protection tripping
- Incorrect generator phase sequence
- Incorrect main phase sequence
- Incorrect system frequency setting
- Generator contactor failure
- Sector contactor failure
- Maintenance requested
- Fuel transfer tank empty
- Fuel transfer tank too full
- Rent hours exhausted
- (Note: * = option)
- Display - Main screen
- Battery voltage (Vdc)
- CA Current & voltage (3 phases) / frequency / hour meter
- Fuel level (%) / oil pressure / coolant temperature
- Maintenance timer (hours)
- Display - Other information's available
- Voltage ph. to ph., ph. to neutral for main & generator sides
- Active, reactive & apparent power / active-reactive energy
- Power factor for each phases
- Engine speed (RPM).
- Total number of starting attempts & percentage of successful starting attempts
- All parameters & status of the system
- Event messages
- Logo and personal project information’s
| GL6A-6T-12 |
| GL6A-6T-12-CAN |
| GL6A-6T-24 |
| GL6A-6T-24-CAN |
 | 71545-00 |
 | 323-419 |
 | 360-004 |
 | 323-094 |
| Documents | English | French | Spanish |
|---|---|---|---|
| Brochures |  p_gl6a_eng | p_gl6a_fra | |
| Presentations | |||
| Installation | |||
| Manuals | |||
| Technicals Informations |
© Enertec Electrical Controls (1989) Inc., 2026. All rights reserved.
