EnerTec
Energy Under Control

HX1206 - Battery Charger for 12Vdc, 6 amps system

Battery chargers from the HX series are designed to maintain the exact voltage needed by lead-acid or nickelcadmium battery for optimal performance. These chargers use the SCR technology and have an automatic equalization mode.

The control circuit protects your battery against surcharge and limits the output current under short-circuit conditions.

Although very economic, these chargers have very important features including, quality of the DC output signal, full rate power and quick adjustment.

Chargers are available with or without a cabinet and remote installations of the power transformer is possible for cumbersome installations. An optional display, allowing reading voltage and current output of the charger, can also be used for the setup of the charger.

Dry contacts are available as an option for remote alarm indication.

BENEFITS

  • Very safe and reliable
  • Secure for the battery
  • Fully automatic operation
  • Fast, precise & unique setup
  • Stability of the calibration
  • Short circuit & over current protection
  • Full charge time optimization
  • Tough and durable design
  • Optional useful current/voltage display
  • Very reliable, 2 year warranty
  • Very competitive price

FEATURES

  • Breaker & switch at power input
  • Low voltage & reverse polarity indicators
  • Very low variation of the output voltage vs input voltage
  • Gradual decrease of current according to the load of the battery
  • Contact set for low battery voltage alarm
  • Compensation circuit for the voltage lost in the wires battery connection
  • Set at factory according to the battery type used
  • Model available with or without cabinet
  • Standard models available the same day
  • CSA certified

OPERATION

Upon loss of charge, the charger increases the current to its maximum capacity. Voltage is then decreased to keep the maximum current value constant, for as long as it takes to reach the equalization voltage.

Once the equalization voltage is reached, the current decreases gradually to reach the current limit of the equalization mode, which is 50% of the maximum value of the charge.

At this level of charge, voltage drops to the value of floating voltage.

HX1206S1B00
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, W/ ENCLOSURE

HX1206S1B01
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, W/ ENCLOSURE, 1 FAULT RELAY

HX1206S1B02
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, W/ ENCLOSURE, 2 FAULT RELAY

HX1206S1BA0
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, W/ ENCLOSURE, DISPLAY

HX1206S1F00
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, PANEL MOUNT

HX1206S1F01
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, PANEL MOUNT, 1 FAULT RELAY

HX1206S1BA1
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, W/ ENCLOSURE, DISPLAY, 1 FAULT RELAY

HX1206S1FA0
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, PANEL MOUNT, V&A DISPLAY

HX1206S1FA1
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, PANEL MOUNT, V&A DISPLAY, 1 FAULT RELAY

HX1206S1BA2
HX BATTERY CHARGER, 115VAC, 12VDC, 6A, W/ ENCLOSURE, DISPLAY, 2 FAULT RELAY

HX1206S2B00
HX BATTERY CHARGER, 230VAC, 12VDC, 6A, W/ ENCLOSURE

HX1206S2B01
HX BATTERY CHARGER, 230VAC, 12VDC, 6A, W/ ENCLOSURE, 1 FAULT RELAY

HX1206S2B02
HX BATTERY CHARGER, 230VAC, 12VDC, 6A, W/ ENCLOSURE, 2 FAULT RELAY

HX1206S2BA0
HX BATTERY CHARGER, 230VAC, 12VDC, 6A, W/ ENCLOSURE, DISPLAY

HX1206S2BA1
HX BATTERY CHARGER, 230VAC, 12VDC, 6A, W/ ENCLOSURE, DISPLAY, 1 FAULT RELAY

HX1206S2BA2
HX BATTERY CHARGER, 230VAC, 12VDC, 6A, W/ ENCLOSURE, DISPLAY, 2 FAULT RELAY

Documents English French Spanish
Brochures

p_bc-hx06_eng
483.78K

p_bc-hx06_fra
486.21K

p_bc-hx06_spa
475.35K
Presentations
Installation
Manuals
Technicals Informations