DMG200
Modular LCD multimeters
non expandable
DMG 200... and DMG 210 digital multimeters are available with a modular housing, 4-module size, and are equipped with a graphic backlit LCD capable of providing extremely clear, intuitive and flexible viewing of all electrical parameters of a system. The very accurate measurements combined with
their extreme compactness provide an ideal solution for every type of application.
The DMG 210 version is supplied with RS485 opto-isolated built-in interface.
BENEFITS
- Auxiliary supply voltage range:
- Voltage measurement range:
- 20-830VAC phase-to-phase
- 10-480VAC phase-neutral
- Usage in medium and high-voltage systems with voltage transformers
- Rated input current: with external CT /5A
- Current measurement range with CT up to 10,000A
- Frequency measurement range: 45-66Hz
- True RMS measurements for voltage and current values
- Accuracy:
- Voltage: ±0.5% (50-830VAC)
- Current: ±0.5% (0.1-1.1 In)
- Power: ±1% f.s.
- Frequency: 0.05%
- Active energy: Class 1 (IEC/EN 62053-21)
- Reactive energy: Class 2 (IEC/EN 62053-23)
- Non-volatile memory for data storage
- Communication protocol Modbus®-RTU and ASCII for DMG 210 only
- Programming and remote control by software for DMG 210 only
- Modular DIN 43880 housing, 4-module
- IEC protection degree: IP40 on front, IP20 at terminals.
FEATURES
- Main measurements and functions include:
- Voltage: phase, line and system values
- Current: phase values (neutral current calculated)
- Power: apparent, active and reactive phase and total values
- P.F.: Power Factor per phase and total
- Frequency of measured voltage value
- HIGH-LOW-AVERAGE value functions of all measurements
- Maximum demand of power and current values
- Total harmonic distortion (THD) of voltage and current values
- Energy meters for active, reactive and apparent values
- Hour counter for programmable total and partial hours.
OPERATION
Certifications and compliance:
Certifications obtained: GOST and UL Listed, for USA and Canada (File E93601), as Auxiliary Devices - Multimeter.
Compliant with standards: IEC/EN 61010-1, IEC/EN 61000-6-2, IEC/EN 61000-6-4, UL 508, CSA C22.2 n° 14.